J
Jopop138

  • 22 févr. 2017
  • Inscrit 23 août 2015
  • merci ex_rat sa a l'air de marché plus d'erreur qd je recharge,
    il me reste maintenant a créer différent user avec cette config
  • j'ai donc aussi testé vos 2 solutions avec le vsftpd.conf d'origine et sa marche pas.
    EagleLake wrote: d'ailleur je vais en faire l'essais
    tu as pu faire le test ? sa a marché toi ?
  • j'ai testé en mettant un autre port que le 2121, j'en ai testé plusieurs,

    mon erreur doit bien venir d'ailleur car j'ai remis le vsftpd.conf
    et j'ai le meme message d'erreur,
  • Merci a vous, mais je viens de tester ces 2 solutions mais j'ai tjrs le même message d'erreur

    l'erreur vient peut être d'autre chose, je sais pas trop, c'est la première fois que j'instal vsftpd
  • Plop all,

    voila je voudrai changer mon port de vsftpd pour pas me connecter par le port 21.

    j'ai suivi le tuto de EagleLake : http://mondedie.fr/d/4814

    j'ai ensuite rajouter listen_port=mon_futur_port

    mais lorsque je relance vsftpd j'ai cette erreur.
    sudo /etc/init.d/vsftpd restart
    [....] Stopping FTP server: vsftpdNo /usr/sbin/vsftpd found running; none killed.
    . ok
    [warn] Starting FTP server: vsftpd[....] vsftpd failed - probably invalid config. ... (warning).
    voici a quoi ressemble mon vsftpd.conf

    # Example config file /etc/vsftpd.conf
        #
        # The default compiled in settings are fairly paranoid. This sample file
        # loosens things up a bit, to make the ftp daemon more usable.
        # Please see vsftpd.conf.5 for all compiled in defaults.
        #
        # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
        # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
        # capabilities.
        #
        #
        # Run standalone?  vsftpd can run either from an inetd or as a standalone
        # daemon started from an initscript.
        listen=YES
        listen_port=2121
        #
        # Run standalone with IPv6?
        # Like the listen parameter, except vsftpd will listen on an IPv6 socket
        # instead of an IPv4 one. This parameter and the listen parameter are mutually
        # exclusive.
        listen_ipv6=NO
        #
        # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
        anonymous_enable=NO
        #
        # Uncomment this to allow local users to log in.
        local_enable=YES
        #
        # Uncomment this to enable any form of FTP write command.
        write_enable=YES
        #
        # Fichier des users
        userlist_file=/etc/vsftpd/user_list
        # Si vous n'avez pas encore créé ce fichier, exécutez ces commandes : mkdir /etc/vsftpd puis
        # J'ajoute tous les utilisateurs du système dans ce fichier (grâce à cette commande :
        # less /etc/vcat /etc/passwd |cut -d: -f1 > /etc/vsftpd/user_list) et je commente les users AUTORISES
        # Chargement de la liste userlist_file
        userlist_enable=YES
        # On refuse tous les utilisateur de la liste (vous devez donc commenter explicitement les utilisateurs autorisés à se connecter)
        userlist_deny=YES
        # Nombre maximum de connexion simultanées
        #max_clients=30
        # Nombre maximum de connexion venant de la même adresse IP
        #max_per_ip=4
    
        # Default umask for local users is 077. You may wish to change this to 022,
        # if your users expect that (022 is used by most other ftpd's)
        local_umask=022
        #
        # Uncomment this to allow the anonymous FTP user to upload files. This only
        # has an effect if the above global write enable is activated. Also, you will
        # obviously need to create a directory writable by the FTP user.
        anon_upload_enable=NO
        #
        # Uncomment this if you want the anonymous FTP user to be able to create
        # new directories.
        anon_mkdir_write_enable=NO
        #
        # Activate directory messages - messages given to remote users when they
        # go into a certain directory.
        dirmessage_enable=YES
        #
        # Activate logging of uploads/downloads.
        xferlog_enable=YES
        #
        # Make sure PORT transfer connections originate from port 20 (ftp-data).
        connect_from_port_20=YES
        #
        # If you want, you can arrange for uploaded anonymous files to be owned by
        # a different user. Note! Using "root" for uploaded files is not
        # recommended!
        #chown_uploads=YES
        #chown_username=whoever
        #
        # You may override where the log file goes if you like. The default is shown
        # below.
        #xferlog_file=/var/log/vsftpd.log
        #
        # If you want, you can have your log file in standard ftpd xferlog format
        #xferlog_std_format=YES
        #
        # You may change the default value for timing out an idle session.
        #idle_session_timeout=600
        #
        # You may change the default value for timing out a data connection.
        #data_connection_timeout=120
        #
        # It is recommended that you define on your system a unique user which the
        # ftp server can use as a totally isolated and unprivileged user.
        #nopriv_user=ftpsecure
        #
        # Enable this and the server will recognise asynchronous ABOR requests. Not
        # recommended for security (the code is non-trivial). Not enabling it,
        # however, may confuse older FTP clients.
    #async_abor_enable=YES
        #
        # By default the server will pretend to allow ASCII mode but in fact ignore
        # the request. Turn on the below options to have the server actually do ASCII
        # mangling on files when in ASCII mode.
        # Beware that on some FTP servers, ASCII support allows a denial of service
        # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
        # predicted this attack and has always been safe, reporting the size of the
        # raw file.
        # ASCII mangling is a horrible feature of the protocol.
        #ascii_upload_enable=YES
        #ascii_download_enable=YES
        #
        # You may fully customise the login banner string:
        ftpd_banner=Welcome to Jopop138 FTP service.
        #
        # You may specify a file of disallowed anonymous e-mail addresses. Apparently
        # useful for combatting certain DoS attacks.
        #deny_email_enable=YES
        # (default follows)
        #banned_email_file=/etc/vsftpd.banned_emails
        #
        # You may restrict local users to their home directories.  See the FAQ for
        # the possible risks in this before using chroot_local_user or
        # chroot_list_enable below.
        chroot_local_user=YES
    #
        # You may specify an explicit list of local users to chroot() to their home
        # directory. If chroot_local_user is YES, then this list becomes a list of
        # users to NOT chroot().
        #chroot_list_enable=YES
        # (default follows)
        #chroot_list_file=/etc/vsftpd.chroot_list
        #
        # You may activate the "-R" option to the builtin ls. This is disabled by
        # default to avoid remote users being able to cause excessive I/O on large
        # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
        # the presence of the "-R" option, so there is a strong case for enabling it.
        #ls_recurse_enable=YES
        #
        #
        # Debian customization
        #
        # Some of vsftpd's settings don't fit the Debian filesystem layout by
        # default.  These settings are more Debian-friendly.
        #
        # This option should be the name of a directory which is empty.  Also, the
        # directory should not be writable by the ftp user. This directory is used
        # as a secure chroot() jail at times vsftpd does not require filesystem
        # access.
        secure_chroot_dir=/var/run/vsftpd
        #
        # This string is the name of the PAM service vsftpd will use.
        pam_service_name=vsftpd
        #
        # This option specifies the location of the RSA certificate to use for SSL
        # encrypted connections.
        rsa_cert_file=/etc/ssl/certs/vsftpd.pem
        pasv_enable=YES
        pasv_promiscuous=NO
        pasv_min_port=40000
        pasv_max_port=40100
        pasv_address=ip_de_mon_serv
        pasv_addr_resolve=YES
    
    
     ssl_enable=YES
        allow_anon_ssl=NO
        force_local_data_ssl=NO
        force_local_logins_ssl=YES
    
        ssl_tlsv1=YES
        ssl_sslv2=YES
        ssl_sslv3=YES
    
    
    

    merci d'avance a celui qui pourra m'aider
  • Plop all

    J'ai 29ans, je début dans tous sa, et donc profite de vos super tuto qui m'aide grandement,

    sa fais quelques mois que je connais votre forum et que je passe y lire quelques tuto,

    surtout pour l'installation de seedbox, je pourrais utiliser votre script qui est super, mais étant curieux je chercher plus a faire l'install complète moi
    bon même si pas tjrs gagné lol


    j’espère continuer a apprendre grâce a votre forum et au expérience de chacun.

    ++