images, run 'installimage' and follow the instruction
install.conf       [----] 36 L:[ 51+ 8  59/142] *(1164/3729b) 0120 0x078                                                                                                                                                               [*][X]
## ==========================

## define your partitions and filesystems like this:
##
## PART  <mountpoint/lvm>  <filesystem/VG>  <size in MB>
##
## * <mountpoint/lvm> mountpoint for this filesystem  *OR*  keyword 'lvm'
##                    to use this PART as volume group (VG) for LVM
## * <filesystem/VG>  can be ext2, ext3, reiserfs, xfs, swap  *OR*  name
##                    of the LVM volume group (VG), if this PART is a VG
## * <size>           you can use the keyword 'all' to assign all the
##                    remaining space of the drive to the *last* partition.
##                    you can use M/G/T for unit specification in MIB/GIB/TIB
##
## notes:
##   - extended partitions are created automatically
##   - '/boot' cannot be on a xfs filesystem
##   - '/boot' cannot be on LVM!
##   - when using software RAID 0, you need a '/boot' partition
##
## example without LVM (default):
## -> 4GB   swapspace
## -> 512MB /boot
## -> 10GB  /
## -> 5GB   /tmp
## -> all the rest to /home
#PART swap   swap        4G
#PART /boot  ext2      512M
#PART /      ext4       10G
#PART /tmp   xfs         5G
#PART /home  ext3       all
#
##
## to activate LVM, you have to define volume groups and logical volumes
##
## example with LVM:
#
## normal filesystems and volume group definitions:
## -> 512MB boot  (not on lvm)
## -> all the rest for LVM VG 'vg0'
#PART /boot  ext3     512M
#PART lvm    vg0       all
#
## logical volume definitions:
#LV <VG> <name> <mount> <filesystem> <size>
#
#LV vg0   root   /        ext4         10G
#LV vg0   swap   swap     swap          4G
#LV vg0   tmp    /tmp     reiserfs      5G


#LV vg0   home   /home    xfs          20G
#
#
## your system has the following devices:
#
# Disk /dev/sda: 6000 GB (=> 5588 Gi.
# Disk /dev/sdb: 119 GB (=> 111 Gi.
#
## Based on your disks and which RAID level you will choose you have
## the following free space to allocate (in Gi:
# RAID  0: ~222
# RAID  1: ~111
PART /boot ext3 512M
PART / ext4 all


## ========================
##  OPERATING SYSTEM IMAGE:
## ========================

## full path to the operating system image
##   supported image sources:  local dir,  ftp,  http,  nfs
##   supported image types: tar, tar.gz, tar.bz, tar.bz2, tar.xz, tgz, tbz, txz
## examples:
#
# local: /path/to/image/filename.tar.gz
# ftp:   ftp://<user>:<password>@hostname/path/to/image/filename.tar.bz2
# http:  http://<user>:<password>@hostname/path/to/image/filename.tbz
# https: https://<user>:<password>@hostname/path/to/image/filename.tbz
# nfs:   hostname:/path/to/image/filename.tgz
#
# for validation of the image, place the detached gpg-signature
# and your public key in the same directory as your image file.
# naming examples:
#  signature:   filename.tar.bz2.sig
#  public key:  public-key.asc

IMAGE /root/.oldroot/nfs/install/../images/Debian-88-jessie-64-minimal.tar.gz

là je suis reparti de zero voici mon installimage,je ne sais plus quoi faire pour avoir mes 9To !!que dois je modifier?,puis je supprimer les exemple du fichier installimage..!!.c'est bizarre en mode install j'ai l'impression qu'il manque un disque.....j'en peu plus

Wagner oui 1xssd et 3xhdd que je n'arrive pas à configurer correctement,je pense qu'il faut configurer le raid comme m'a indiqué Hetzner ici https://wiki.hetzner.de/index.php/LSI_RAID_Controller/en
mais cela depasse mais competence

Finalement j'en ai tellement eu marre que je suis parti chez oneprovider ,le service technique Hetzner est une vrai catastrophe !! J'avais meme pas la bonne config !!En espérant que je n'aurai rien à payer pour mes 4 jours chez eux !!