Sirgue wrote:Essaye plutôt un apt-get remove --purge php5-fpm 🙂
L'erreur revient pendant la reinstallation ...
Je suis de plus en plus convaincu que le HDD est en train de lâcher. Peut-être que je me trompe mais ça concorde avec l'enchainement des événements :
- rutorrent qui cesse subitement de fonctionner alors que je n'ai absolument rien bidouillé sur le serveur
- le filesystem qui passe en read-only pour la 2eme fois en moins de 48 heures
- certains téléchargements échouent en SFTP parce que les fichiers sont corrompus (Error: error while reading: failure)
- apparition d'un problème avec les "locales", impossible de les reconfigurer
LANG=\(null\)
LANGUAGE=
LC_CTYPE="(null)"
LC_NUMERIC="(null)"
LC_TIME="(null)"
...
J'ai fait un check long avec smarttools mais je ne sais pas vraiment comment on interpréte les logs ...
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.23-xxxx-std-ipv6-64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ACA050
Serial Number: 13B4H4KGS
LU WWN Device Id: 5 000039 ff2de395a
Firmware Version: MS1OA750
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Nov 24 14:17:04 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 4509) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 76) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 058 058 016 Pre-fail Always - 412096498
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 81
3 Spin_Up_Time 0x0007 120 120 024 Pre-fail Always - 190 (Average 191)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 22
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 5
7 Seek_Error_Rate 0x000b 099 099 067 Pre-fail Always - 65536
8 Seek_Time_Performance 0x0005 110 110 020 Pre-fail Offline - 36
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 15253
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 22
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 111
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 111
194 Temperature_Celsius 0x0002 206 206 000 Old_age Always - 29 (Min/Max 12/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0022 001 001 000 Old_age Always - 2680
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 647 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 647 occurred at disk power-on lifetime: 15252 hours (635 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 98 93 05 07 Error: UNC at LBA = 0x07059398 = 117805976
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 98 93 05 40 00 18:49:19.545 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 18:49:19.545 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 18:49:19.544 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 18:49:19.544 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 18:49:19.544 SET FEATURES [Set transfer mode]
Error 646 occurred at disk power-on lifetime: 15252 hours (635 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 98 93 05 07 Error: UNC at LBA = 0x07059398 = 117805976
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 98 93 05 40 00 18:49:15.508 READ FPDMA QUEUED
60 08 00 60 93 05 40 00 18:49:15.508 READ FPDMA QUEUED
60 08 00 68 93 05 40 00 18:49:15.508 READ FPDMA QUEUED
60 08 00 70 93 05 40 00 18:49:15.508 READ FPDMA QUEUED
60 08 00 78 93 05 40 00 18:49:15.508 READ FPDMA QUEUED
Error 645 occurred at disk power-on lifetime: 15252 hours (635 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 d7 05 07 Error: UNC at LBA = 0x0705d778 = 117823352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 78 d7 05 40 00 18:43:48.477 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 18:43:48.476 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 18:43:48.476 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 18:43:48.476 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 18:43:48.475 SET FEATURES [Set transfer mode]
Error 644 occurred at disk power-on lifetime: 15252 hours (635 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 d7 05 07 Error: UNC at LBA = 0x0705d778 = 117823352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 78 d7 05 40 00 18:43:43.987 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 18:43:43.986 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 18:43:43.986 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 18:43:43.985 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 18:43:43.985 SET FEATURES [Set transfer mode]
Error 643 occurred at disk power-on lifetime: 15252 hours (635 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 d7 05 07 Error: UNC at LBA = 0x0705d778 = 117823352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 78 d7 05 40 00 18:43:39.587 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 18:43:39.587 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 18:43:39.587 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 18:43:39.586 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 18:43:39.586 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 15252 14336
# 2 Extended offline Aborted by host 90% 15252 -
# 3 Short offline Completed without error 00% 11918 -
# 4 Short offline Completed without error 00% 11917 -
# 5 Short offline Completed without error 00% 11916 -
# 6 Short offline Completed without error 00% 44 -
# 7 Short offline Completed without error 00% 40 -
# 8 Short offline Completed without error 00% 39 -
# 9 Short offline Completed without error 00% 31 -
#10 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Cette ligne du log est intéressante :
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 15252 14336
Ou est-ce-que je fais fausse route ?
